Home
Point Driver

Tool Grip and Tether Attachment Point

By A Mystery Man Writer

Description
The Tool Grip and Tether Attachment Point installs onto screwdrivers and nut drivers to create a retrofit attachment point for tethering tools up to 1lb // 0.45kg, preventing dropped or falling objects from occurring on the job.

The Squids 3745 Tool Grip and Tether Attachment Point (2-pack) installs onto screwdrivers and nut drivers to create a retrofit attachment point for tethering tools up to 1lb // 0.45kg, preventing dropped or falling objects from occurring on the job. Connection points for tool lanyards can be tricky to find, especially on smaller hand tools like screwdrivers and nut drivers. While working at heights, it is important to tether tools as part of your overall fall protection plan, but the lack of these connection points can make that difficult.</p>

STRAIGHTFORWARD INSTALLATION</h3>

Designed in two pieces, this tool attachment features an end cap and a rubber sleeve. To install, slide a screwdriver or nut driver into the rubber sleeve and plug the end cap’s pegs into the reinforced holes of the rubber sleeve. The sleeve features a textured rubber and is ergonomically designed to cover the entire tool handle—providing greater comfort, torque and an enhanced grip. The end cap features a swiveling connection point for tool tethering, which helps prevent tangles and binding when used with a tool lanyard.</p>

Built-in trim lines on the sleeve allows for this tool attachment to be customized to fit varying driver lengths. A flexible opening on the bottom of the rubber sleeve expands to allow for larger nut drivers to be installed. Unlike competition, this tool attachment grip can be installed, removed and re-installed multiple times. The swiveling tool attachment portion does not interfere with proper holstering or prevent a user from pressing down on the end of the tool to gain leverage when using.</p>

TESTED TO BE TRUSTED</h3>

These tool tether attachments are built to withstand defined weight limits and can easily be used by any worker to help avoid accidentally dropping objects that could cause damage, injuries or possibly death. These attachments are third-party certified to 1lb // 0.45kg maximum capacity and meet the ANSI/ISEA 121-2018 standard with all required labeling.</p>

Ideal for those tethering tools in construction, telecommunications, oil and gas, power generation, utilities, wind energy, manufacturing or other jobsites where dropped objects are a risk.</p>

This tool attachment is compatible with screwdrivers or nut drivers with handles ranging from 1in // 2.5cm to 1.28in // 3.2cm in diameter and a handle height of 4.5in // 11.4cm</p>

Tool Grip and Tether Attachment Point
Bayonet Tether - Working At Height Training & Equipment
The MILWAUKEE 9 Lineman's Pliers (USA) deliver the easiest cuts and a lasting edge for the professional user. These pliers are designed with an optimized pivot point to provide the best leverage for tough cuts through materials like ACSR, hard wire, and soft wire. The cutting pliers feature laser-hardened edges and teeth for a long cut life and maximum grip. The Lineman's Pliers are engineered to deliver the smoothest open and close experience from the start with no break-in period required.
Tool Grip and Tether Attachment Point
Milwaukee MT500 9 Lineman's Dipped Grip Pliers
Tool Grip and Tether Attachment Point
New Tool Tethering Solution Hits the Sweet Spot: Simplicity, Safety and Performance
Tool Grip and Tether Attachment Point
Power Tool Bracket – Pneumatic Tool Trap
Self-locking carabiner Third party certified to a 15 lb. (6.8 kg) maximum capacity with 2:1 safety factor 5/8 tubular webbing 32 in. (81.3 cm) in length relaxed, 47 in. (119.4 cm) in length stretched Details Self-locking carabiner Third party certified to a 15 lb. (6.8 kg) maximum capacity with 2:1 safety factor 5/8 tubular webbing 32 in. (81.3 cm) in length relaxed, 47 in. (119.4 cm) in length stretched Bungee tool tether, 15 lb. (6.8kg) capacity, self-locking carabiner.
Tool Grip and Tether Attachment Point
3M DBI-SALA 1500047 Hook2Loop Bungee Tether
Tool Grip and Tether Attachment Point
Tool Tether Anchor Eco Impact Glove - C5 (PK 12 Pairs) - Gripps – X1 Safety
Tool Grip and Tether Attachment Point
NLG 360 D Ring Loop Tool Tether – NLG®
Tool Grip and Tether Attachment Point
Squids 3745 Tool Grips Install onto Screwdrivers & Nut Drivers to Create Attachment Points for Tool Tethering
Tool Grip and Tether Attachment Point
Ergodyne Corp. For Construction Pros
Tool Grip and Tether Attachment Point
Falling Objects Prevention // At-Heights Safety
DBI-SALA Quick Spin Adaptors The top of a Quick Spin rotates preventing tangles when using tools that rotate such as screwdrivers. Reusable design can be installed and removed from tools again and again. Make tools tether-ready in seconds. Reusable, suitable for non-conductive use, and a tangle-resistant spin top make Quick Spins an outstanding drop prevention solution that doesn't deface tools.
Tool Grip and Tether Attachment Point
3M DBI Sala 1500029 Quick Spin - Large (10 Pack)
Tool Grip and Tether Attachment Point
KNIPEX 8605250T 250mm Pliers Wrench with Tether Attachment Point (KNIP-8605250T) - SafetyLiftinGear
from per adult (price varies by group size)